At the end of your deployment, you should inspect and clean the SM5, copy your data from the SD cards, and prepare it for storage.
Procedure
When you arrive at the deployment site:
- Inspect all microphones and cables for signs of wildlife damage.
- Shelter the SM5 from rain and wipe away debris or moisture from the outside of the SM5.
- Open the SM5 and note whether it is still powered on and whether it displays any error messages on its status screen.
-
Turn off the SM5.
You may remove the SD cards after turning off the SM5, or you may transport the SD cards installed in the recorder.
-
Disconnect any external microphone cables or power cables at both ends before
packing and transporting your equipment.
This prevents damage to your connection points as items shift around.
When you return from the field:
-
Use a computer to copy the full contents of every SD card to one or more
long-term storage locations.
Consider storing data in two physically separate locations, such as on one local hard drive and a server or second hard drive in a different building.
- Inspect the recorder inside and out, plus all microphones and cables, for signs of damage.
-
Clean the outside of the recorder, avoiding pressing on or scraping the face of
any microphone.
You can use soapy water or isopropyl alcohol on the outside of the recorder. Do not use water to clean anywhere inside the recorder.
-
Remove the batteries from the main compartment before storing the SM5.
Some types of batteries can leak corrosive chemicals if left installed in a device for long periods of time.Rechargeable batteries should be stored in a non-conductive container. The batteries should not be allowed to move around and contact each others' metal components.