Data recorded by the SMART System, including recordings, results and log files, and device settings, are saved on the SMART Controller's internal drive under /var/www/html/storage. Knowing where different types of files are stored can help when you need to manage files via the command line.
Note: Be very careful when manipulating files via the command line. Moving or
editing necessary files could mean you need to reinstall the SMART System
software.
- /var/www/html/
-
Other than the storage directory, this directory stores the assets used by the SMART Control Panel web interface.
- /var/www/html/storage
- Stores settings configured using the SMART Control Panel.
- /var/www/html/storage/devices
- Contains a subfolder for each microphone connected to the SMART System, listed by the microphone's MAC address.
- /var/www/html/storage/devices/MAC address
- The folder for each attached microphone stores its status information and active settings.
- /var/www/html/storage/devices/MAC address/data
- Stores csv results tables, log files, and recordings saved from a given microphone.
- /var/www/html/storage/dump
- When you generate a diagnostic dump file from the Maintenance tab, settings and log files are copied to this folder before being compressed into the file /var/www/html/storage/logs/dump.zip.
- /var/www/html/storage/logs
- Stores log text files relating to the SMART Controller, including daily reports, cron logs, and SCADA logs.
- /var/www/html/storage/profiles
- Stores Schedule Profiles and Setting Profiles.