According to EN ISO/IEC 17050-1:2010
- Declaration Number
- WAI20210407
- Manufacturer
-
Wildlife Acoustics, Inc.
3 Mill and Main Place, Suite 110
Maynard, MA 01754
United States of America - Product Name
- SMART System
- Product Type
- Ethernet microphone
The above product conforms to the appropriate country standards and governing regulations listed below. As the manufacturer, we are fully responsible for the design and production of the above-mentioned equipment.
- (FCC) Code of Federal Regulations, Title 47, Part 15, Subpart B
- Class B Device (2015): Radio Frequency Devices – Unintentional radiators
- AS CISPR 11 (2017)
- Industrial, scientific and medical (ISM) radio-frequency equipment – electromagnetic disturbance characteristics – limits and methods of measurement, Class A
- EN 55011 (2016)
- Industrial, scientific and medical (ISM) radio-frequency equipment – Electromagnetic disturbance characteristics – Limits and methods of measurement, Class A
- EN 61000-4-2 (2009)
- Electromagnetic compatibility (EMC) Testing and measurement techniques – Electrostatic discharge immunity test; 4 kV Contact Discharge, 8 kV Air Discharge, 4 kV Horizontal and Vertical Coupling Planes (HCP and VCP, respectively)
- EN 61000-4-3 (2006)
- Electromagnetic compatibility (EMC) Testing and measurement techniques – Radiated, radiofrequency, electromagnetic field immunity test; 3 V/m, 80 to 1000 MHz; 3 V/m, 1.4 GHz to 2 GHz; 1 V/m, 2 GHz to 2.7 GHz
- EN 61000-4-4 (2012)
- Electromagnetic compatibility (EMC) Testing and measurement techniques - Electrical fast transient/burst immunity test; 1 kV on DC Mains; 1 kV on Data Cables
- EN 61000-4-5 (2014)
- Electromagnetic compatibility (EMC) Testing and measurement techniques – Surge immunity test; 1 kV on DC Mains
- EN 61000-4-6 (2014)
- Electromagnetic compatibility (EMC) Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields; 3 Vrms on DC Mains, 150 kHz to 80 MHz; 3 Vrms on Data Cables 150 kHz to 80 MHz
- EN 61326-1 (2013)
- Electrical Equipment for Measurement, Control and Laboratory use EMC Requirements
- ICES-003 (2020)
- Industry Canada, Interference-Causing Equipment Standard, Digital Apparatus, Class A
- IEC 60529
- Ingress Protection IP67
Marking appears as follows:
This product was tested in a typical configuration.
Ian Agranat, President
Wildlife Acoustics, Inc.
April 7, 2021
Electromagnetic Interference
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Changes or modifications not expressly approved by Wildlife Acoustics, Inc. could void the user's authority to operate the equipment.