Configure Automatic Data Backup to Network Storage - SMART System

During daily maintenance, the SMART Controller can copy new data from its internal drive to a network storage location using rsync.

1. Open the SMART Control Panel and go to Maintenance.
2. Under Copy Data to Network via rsync, select the types of files you wish to back up.

   CSV Files

   Bat analysis results files.

   Log Files

   Text files that record status updates from the SMART Controller and each microphone.

   WAV/W4V Files

   Full-spectrum audio recordings. The Microphone Setting Profile must have Output WAV enabled to save WAV or W4V files to internal storage.

   ZC Files

   Zero-crossing audio recordings. The Microphone Setting Profile must have Output ZC enabled to save ZC files to internal storage.

3. Enter the destination path for the files and the required password.
   The destination path is generally formatted as username@host:destination_path.
4. Select Apply Changes.
5. Select Send Test File to send an example text file named testfile_YYYYMMDD_hhmmss.txt to the destination path.