Access the SMART Command Line via the SMART IoT Gateway - SMART System

SMART System User Guide (Latest Software Version)

Core Product
SMART System
Accessory
SMART Software Version
1.3.9

Once a SMART System is connected to the SMART IoT Gateway, you can use ssh to interact with the SMART command line from any Internet-connected computer.

Before you begin

  • Connect your SMART System to a network with Internet access.
  • If your network has a firewall, an IT administrator must configure the firewall to open port 21577.
  • Enable the Wildlife Acoustics IOT Gateway and authorize your Wildlife Acoustics account as a user.

Procedure

  1. In a web browser, go to https://www.wildlifeacoustics.com, go to My Account > SMART Portal, and find the entry for the SMART System you want to access.
  2. If your current IP address is not authorized to access the SMART System, select Change IP > Authorize My IP Address
  3. Under the Control Panel URL column, note the IP address of the SMART, which is the middle portion of the URL.
    If a SMART System's Control Panel URL is https://12.34.56.78:11223, the IP address is 12.34.56.78.
  4. Note the value of the SMART System's SSH Port number.
  5. Open an ssh client and connect to the SMART System's IP address using the SSH port number.
    Platform Instructions
    Windows
    1. Install and open an SSH client, such as PuTTY.
    2. Enter the SMART IP address you noted from the SMART Portal as the Host Name (or IP address).
    3. Enter the SMART's SSH port number as the Port.
    4. Select Open.
    MacOS or Linux
    1. Open your system's Terminal or Command Prompt.
    2. Enter the command ssh -p ssh_port smart@smart_ip_address, where ssh_port and smart_ip_address are the values you noted from the SMART Portal.