SMART System User Guide (Latest Software Version) - SMART System

Core Product: SMART System
Accessory
SMART Software Version: 1.3.9

Terms of Use
Introduction
Curtailment Strategies
SMART System Physical Components
SMART Controller Overview
SMART MIC-1 Overview
Example Deployments
Getting Support
Getting Started
SMART Controller Package Contents
SMART MIC-1 Package Contents
Turn the SMART Controller Off and On
Connect to the SMART Control Panel for the First Time
Microphone Settings and Schedules
Select a Microphone Setting Profile and Schedule Profile
Creating and Editing Settings Profiles
Create a New Setting Profile
Edit an Existing Setting Profile
Delete a Setting Profile
SMART MIC-1 Settings
Audio Settings
Sample Rate
High-Pass Filter
Gain
Maximum Duration
Triggered Recording with Bat Call Analysis
Pause Triggering When Heater Is On
Recording Output Settings
Full-Spectrum Output Settings
Zero-Crossing Output Settings
Heater Settings
Cycle the SMART MIC-1 Heater On and Off
Enable the SMART MIC-1 Heater Once Per Night
Disable the SMART MIC-1 Heater
Calibration Settings
Settings for Triggered Recording
Pulse-Level Trigger Settings
Minimum and Maximum Frequency
Minimum and Maximum Pulse Duration
Pass-Level Trigger Settings
Maximum Sequence Duration
Pre-Trigger and Post-Trigger Recording
Maximum Inter-Pulse Gap
Minimum Number of Pulses
Constant-Frequency (CF) Filter
Bat Auto-ID Classifier Settings
Enable Bat Auto-ID
SMART MIC-1 Schedules
Create a New Schedule
Example Schedule: 30 Minutes Before Sunset to 30 Minutes After Sunrise
Schedule Blocks
Schedules Using Sunrise and Sunset
Schedules with Multiple Blocks
Change Microphone Name (Prefix)
SMART Controller Configuration
Default System and Network Settings
Configure Basic System Settings
Configure Time, Date, and Location Settings
Connect SMART to a Local Network Time Server
Time Zones and Daylight Saving Time
Change Password
Change System Name
Network Configuration
Standalone Configuration
Configure the SMART Controller as a Wi-Fi Access Point
Check the SMART Controller's Wi-Fi Network IP Address
Local Network Configuration
Connect the SMART Controller to a Local Network via Ethernet
Connect the SMART Controller to a Local Network via Wi-Fi
SMART IoT Gateway
Enable the SMART IoT Gateway Connection
Access the SMART Control Panel via the SMART Portal
Access the SMART Command Line via the SMART IoT Gateway
SMART IoT Gateway Security
Configuring a Firewall for the SMART IoT Gateway
Disable SMART Controller Wi-Fi
Install Custom SSL Certificates
Restore the Default Network Configuration
Edit the Netplan Configuration via the SMART Control Panel
Edit DHCP Server Settings
Update the SMART System Software, Microphone Firmware, and Operating System
Check the Installed Ubuntu Version
Update the SMART System Software
Update the SMART System Software via the SMART Control Panel
Update the SMART System Software via the Linux Command Line
Update the SMART MIC-1 Firmware
Update the SMART System to Ubuntu 22
Configure Email Alerts
Data Management
Internal Drive Structure
File Name Conventions
Daily Automatic Data Maintenance
Schedule Daily Automatic Maintenance and Power-Down
USB Backup
Connect and Verify a USB Backup Drive
Configure Automatic Backup to USB Storage
USB Backup Drive Structure
Configure Automatic Data Backup to Network Storage
Automatically Delete Old Recordings from Internal Storage
Configure Automatic Results Table and Log File Rotation and Deletion
Configure Daily Email Reports
Daily Custom Script Execution
Manually Download Data from the SMART Control Panel
Generate Diagnostic Dump Files
Check Available Internal Storage
Check Available Storage Using the SMART Control Panel
Check Available Storage Using the SMART Portal
Microphone Log Files
Microphone Log Error Messages
SMART Enclosure
Installing SMART
Preparing to Install
Grounding
Calculating Battery and Solar Panel Needs
Installing Microphones
Microphone Placement on Wind Turbines
SMART MIC-1 Mounting Bracket
SMART MIC-1 Mounting Bracket Specifications
Orienting the SMART MIC-1 Mounting Bracket
Assemble the SMART MIC-1 Mounting Bracket
Install the SMART MIC-1 in the Mounting Bracket
Connecting the SMART MIC-1 to the SMART Controller
Assemble the RJ45 Weatherproofing and Ferrite Kit
Install the Ethernet Surge Suppressor
Extending the Connection between the SMART MIC-1 and SMART Controller
Bat Activity Alarms and Control System Integration
Alarms
Alarm Logic Overview
Alarm Strategy
Design, Test, and Implement Alarms
Record Sample Data for Alarm Design
Review Sample Data for Bat and Noise Characteristics
Simulate Alarms in Kaleidoscope Pro
Review Alarm Simulation Results
Implement Alarms on a SMART System
Alarm Criteria Syntax
Control System Integration
Control System Integration with OPC UA
Install and Configure the SMART OPC UA Server
Shell Commands for the OPC UA Server
Connecting to the OPC UA Interface
Customize Startup Arguments for the SMART OPC UA Server
Command Line Arguments to the SMART OPC UA Server
SMART OPC UA Information Model
OPC UA Events
Enable SMART System Status Events over OPC UA
List of OPC UA Event Types
Control System Integration over Modbus
Configure Modbus TCP or Modbus RTU
Addressable Modbus Registers
Control System Integration Using the Digital I/O Pins
Serial Output
Enable Serial Output
Change Serial Port Mode
Serial Port Event Message Format
Serial Port Poll Message Format
Troubleshooting
Privacy or Security Warning When Using SMART Control Panel
Unable to Use SSH via SMART IoT Gateway
SMART System Does Not Appear in SMART Portal
Not Receiving SMART Emails
Specifications
SMART Controller Specifications
SMART MIC-1 Microphone Specifications
Glossary
acoustically triggered curtailment
bat pass
call body
characteristic frequency
knee
microphone element
Network Time Protocol
octaves per second
OPC Unified Architecture
Power over Ethernet
slope
zero-crossing
Warranty
Declaration of Conformity
Prohibition Against Eavesdropping
Document History
Patents
Copyright Notices
Contact Information

Back to home page